|
|
Hero X fiber image transmission integrated remote control integrates fiber image transmission ground unit, display and remote control in one, with our fiber image transmission air unit F1, F2, F3, can easily realize 0~30km (80km can be customized) fiber signal stable transmission. Through optical fiber as a high-speed, low-delay data transmission medium, the high-definition video signal captured by the UAV is transmitted back to the remote control in real time. At the same time, the OSD displays the battery power, aircraft attitude, GPS information, flight control mode, unlocking state and other information, and the flight control of the UAV is carried out through 15 physical channels. Optical fiber transmission system has greatly improved the application range because of its super bandwidth, super anti-interference and extremely low delay.
The fiber remote controller HeroX uses Linux system and has rich interfaces. Including fiber FC interface, RJ45 interface, GH1.25-8Pin interface (SBUS/UART/ETH) and dual Type C interface, etc. Fiber transmission can be realized by connecting the fiber image air unit through the standard fiber FC port. By connecting the RJ45 interface with the standard network cable, the real-time video transmission can be synchronized displayed on the PC or the ground station to share the flight data. GH1.25-8Pin interface (SBUS/UART/ETH) is convenient to control the aircraft and control the pan, pod and other equipment. It supports Mavlink/CRSF protocol, and data transmission supports open source flight control like PIX, APM and Betaflight. Type-C interface 1 is used for data storage, and Type-C interface 2 can realize the charging of the remote control. When the power of the external equipment is insufficient, the remote control can also discharge to realize the power supply of the external equipment, which is easy to use.
Hero X adopts aviation aluminum alloy material, reasonable structure design, to ensure small size, light weight (only 0.8kg), with a good feel. Built-in 7 inch 1920*1200 high brightness touch screen, the highest brightness of 2000nit outdoor visibility. Four removable 18650 (3500mAh*4) lithium ion batteries, fully charged can work for 9 hours, support PD (45W) /QC protocol charging, one hour can be full of 80% of the power, and a digital tube real-time display battery power information, outdoor use of insufficient power can use the power bank power supply. The peripheral interface is made dust-proof, splashproof and other protection measures to ensure the stable and smooth operation of the equipment in the harsh environment.
